Related products

High-efficiency machining center (three-axis rail)

ASK for quote

Herringbone column structure design, rice reinforcement + tic-bar reinforcement,high bending tifnes, nd the bed ultra-high connection rigidity.
HT300 castings, manual aging after secondary annealing.
Z-axis is designed without counterweight block.The servo motor with enlarged brake is adopted to adjust the feed processing without vibration.

	Machinery specification	Untis	CV-600	CV-650
Processing range	X-axis stroke	mm	600	650
	Y-axis stroke	mm	400	500
	Z-axis stroke	mm	450	500
Workbench	Workbench size	mm	700*420	800*500
	Workbench bearing	kg	250	450
	Workbench T slote size		3-14-120	3-18-120
	Distance from table to spindle nose	mm	150-600	150-650
Spindle	Distance from spindle center to column track plane	mm	470	545
	Spindle taper hole specification		BT40 Φ120	BT40 Φ120
	Speed of spindle	rpm	10000(belt)/12000(direct connection)	10000(belt)/12000(direct connection)
	Spindle motor power	kw	7.5/11	7.5/11
Triaxial	Triaxial motor powerX/Y/Z	kw	1.5/1.5/3	2/2/3
	Triaxial rapid displacementX/Y/Z	m/min	48/48/48	48/48/48
	Triaxial cutting feed rate	mm/min	1-10000	1-10000
Precision	Positional accuracy	mm	±0.003/300	±0.003/300
Precision	Repeated accuracy	mm	±0.0025/300	±0.0025/300
Magazine tool	Tool change type		Disc type(Knife arm type)	Disc type(Knife arm type)
Magazine tool	Tool storage capacity	pcs	20	24
Others	Power demand	KVA	20	20
	Barometric demand	kg/cm^2	≥6	≥6
	Z-axis counterweight mode
	Total weight	kg	3500	4500
	Floor space(Lengthwidthheight)	mm	200024502500	230024502600
	Controller		FANUC/Mitsubishi	FANUC/Mitsubishi